THRUNITE TN42 戶外探照搜救遠射強光手電筒 2000流明 1550米

Features 

• One of the most powerful throw LED lights on the market.
• Uses one advanced CREE XHP35 HI LEDs with a lifespan of 20 years
• The high output reaches 2000 lumens and an ultra-long distance of 1550 meters. 
• ThruNite ITC technology to prevents possible damage from overheating.
• Reversed polarity protection system prevents damage to the light.
• Intelligent and ergonomic user-friendly interface.
• Only applicable for 18650 batteries to use.

Specifications

• LED: 1xCREE XHP35 HI LED with a lifespan of 20+ years of run time.
• Runs on:  4 x 18650 (ThruNite 18650 3200Mah).
• Working voltage: 5.5V-8.4V.
• Output & Runtime (Tested with four pieces ThruNite Li-ion 18650 batteries (3.6V/3400mAh) and for CW. NW parameters is 10% off):
• Strobe(680 lumens /10.8hrs),
• Turbo(2000 lumens/1.5hrs),
• High(780 lumens /5.3hrs),
• Medium(256 lumens /17.8hrs),
• Low(38 lumens /4.3days),
• Firefly (0.8 lumens /58days).
• Peak beam intensity: 600750cd.
• Max beam distance: 1550m.
• Waterproof to IPX-8 Standard (2 meters).
• Impact resistant: 1.0 meter.
• Working Temperature: -40℃-40℃.
• Dimensions: 206mm (length) x 100mm x 52mm.
• Weight: 666g (including battery carrier).
• Accessories: Shoulder strap*1, Strap ring*1, A, Spare O-ring*2, Side switch Cap*1, Battery Carrier x1 (inside the flashlight).

Operation

• Turn On/Off 
  Press the side switch to turn the light on/off.
• Change Mode
  
  • When the light is on, long press the side switch to cycle through low, medium and high.
  • Shortcut to firefly: When the light is off, long press the side switch to get firefly mode.
  • Double click to turn to turbo from any mode. Another double click to get strobe.
• ITC Technology
  The light will automatically lower the current when temperature in LED or driver rises to 80 degrees centigrade to protect the flashlight from overheating. 
  Thus to extend its lifespan.
• Memory Function
  The light will turn on in the last mode accessed, except firefly, turbo and strobe. 
• Low Voltage Indication
  When the indicating light on the side switch turns from blue to red, it means the battery package should be replaced or charged.
  
• Battery Replacement:
  Take off the tail cap, insert four 18650 batteries into the battery carrier, put the carrier into the flashlight and screw on the tail cap. With either end of the battery carrier towards the light head is OK. But make sure the batteries are correctly inserted into the carrier with polarities matched (springs on the carrier should connect with the cathodes of batteries).
  

  ＊＊＊＊＊＊＊＊＊＊＊＊

  因商品流動率大

  下標前請先詢問有無現貨

  預購享有專屬優惠

  歡迎來電洽詢：0981_190_347

  ＊＊＊＊＊＊＊＊＊＊＊＊