(停產) zebralight SC600w Mk III XHP35 中白 18650 頭燈

關機=》按1下進入高亮=》再按2下進入另一高亮

關機=》按2下進入中亮=》再按2下進入另一中亮

關機=》按3下進入暴閃=》再按2下進入另一暴閃

關機=》按4下進入電量測試

關機=》長按進入低亮，持續長按，低中高循環。

高1、中1、低1是固定的，另一個可設定。

點亮狀態（低/中/高）=》連續切換5次（按2下方式切換），

第6次開始就會在3個子檔切換，選好後，按1下關掉，就設定好了。

#暴閃不能設定只能切換。

• LED: Cree XHP35 Neutral White (Nominal CCT 4500K)
• User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
• Light Output (runtimes)
  • High:        H1 1126 Lm (PID, approx 2.2 hr)  or  H2 580 Lm (PID, 2.8 hr)/312 Lm (4.3 hr)/139 Lm (12 hr)
  • Medium:  M1 61 Lm (33 hrs)   or   M2 28 Lm (73 hrs)/10 Lm (8 days)
  • Low:         L1 3.3 Lm (18 days)  or  L2 0.37 Lm (2.8 months)/0.05 Lm (5.1 months)/0.01 Lm (7.1 months)
  • Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
• Operating Voltage Range: 2.7V - 6.0V
• Battery: One 18650 size (i.e. unprotected, 65.0-65.2 mm long) 3.6-4.35V li-ion rechargeable. Batteries are not included in the package.
• Parasitic Drain: Negligible (much less than the self discharging of a battery)
• Beam Type
  • 80 degree spill
  • 10 degree hot spot
• Dimensions
  • Head Diameter: 1.2 inch (30 mm)
  • Body Diameter: 0.98 inch (25 mm)
  • Length: 3.8 inch (96 mm)
• Weight
  • 2.26 oz (64 gram) without battery
• Features
  • PID thermal regulated outputs (two highest output levels)
  • Builtin battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
  • Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
  • Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
  • Durable electronic soft-touch switch
  • Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
  • Precision machined unibody casing from premium grade  aluminum bar stocks
  • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
  • Durable natural hard anodized finish (Type III Class I)
  • Sealed and potted LED driver circuitry
  • Tempered optical grade glass
  • Orange peel textured reflector
  • Battery reverse polarity protection
  • Pocket clip
  • Lanyard ring
  • Waterproof to IPX7 (2 meters, 30 minutes)