Board logo

標題: nitecore充電器的環境測試 [打印本頁]

作者: foger    時間: 2018-6-8 20:11     標題: nitecore充電器的環境測試

https://youtu.be/MIt_3iHhgQg

阻燃測試
Flame Retardant Test



用酒精燈火苗點燃充電器後,離開火源觀察充電器會否繼續燃燒。
Ignite the charger to test the charger’s ability to cease burning once the fire source is removed.

奈特科爾:
當火源離開後,充電器馬上停止燃燒
It ceases burning once the fire is removed.
對比產品:
當火源離開後,充電器仍然在燃燒。
It still keeps burning after the fire is removed.

實驗結果:
通過-NITECORE奈特科爾的充電器外殼為阻燃材料,當離開火源後,火苗會熄滅不會繼續燃燒。順利通過阻燃測試。

失敗-對比產品沒有採取阻燃材料,離開火源後,火苗會越來越旺,繼續燃燒。最後只能用滅火器來滅火處理,沒有通過阻燃測試。
Test Result:
PASS: The NITECORE charger uses flame retardant material.
FAIL: The compared charger doesn’t use flame retardant material.
Catch(06-05-16-09-51).jpg

高溫測試
High Temperature Test



把烘箱加溫至140攝氏度,將充電器放進實驗儀中3小時,觀察其有沒有變形。
Test procedure:
Heat the air oven to 140℃. Put the charger into the air oven for 3 hours, and observe whether if the charger is distorted.

奈特科爾:
NITECORE奈特科爾的充電器經過3小時的高溫測試後外殼仍保持完好。
The outer case of NITECORE charger remains well after3 hours of high temperature test.

對比產品:
對比的產品很快就出現軟化的情況,3小時候外殼完全軟化。
The outer case of compared charger has melted after3 hours of high temperature test.

實驗結果:
通過-NITECORE的充電器經過3小時的高溫測試後外殼仍保持完好。通過高溫測試。
失敗-對比產品很快就出現軟化的情況,3小時候外殼完全軟化。沒有通過高溫測試。
Test Result:
PASS: The NITECORE charger remains well after 3 hours.
FAIL: The compared charger has been softened after 3 hours.
Catch47BC(06-05-16-09-51).jpg

絕緣性能測試
Dielectric withstand test



在高壓輸入側與低壓輸出側加上3750V電壓,通電3秒,若漏電電流少於5mA,則被測產品的絕緣性能符合標準。
Use a high voltage tester to apply 3750V to the charger for 3 seconds via connecting the input terminal and the output terminal of the charger, then monitor if the leakage current is below 5mA.

奈特科爾:
通過-通電持續5秒,通過測試。
對比產品:
失敗-通電0.2秒擊穿,不通過測試。
PASS: NITECORE charger has passed the test.
FAIL: The compared charger has failed the test in 0.2 seconds.


測試結果總結
TEST RESULT SUMMARY


阻燃測試
Flame Retardant Test
-使用阻燃材料。
It uses flame retardant material.
-使用非阻燃材料。
It doesn’t use flame retardant material.

高溫測試
High Temperature Test
-三小時測試後依然完好。
It remains well after 3 hours.
-三小時測試後已融化。
It has melted after 3 hours.

絕緣性能測試
Dielectric Withstand Test
-成功通過測試。
It has passed the test.
-在0.2秒內測試失敗。
It has failed test in 0.2 seconds.


內部結構對比
Inner Structure Comparison


導電滑軌VS 彈簧導電
Conductive rail VS Conductive spring


有智能控制芯片 VS 無智能控制芯片
DC-DC Charging Mode VS Linear Charging Mode


對比結果:
Comparison Result:


*NITECORE奈特科爾的充電器使用導電滑軌,減少到點損耗及發熱,而對比充電器使用普通彈簧導電。
*The NITECORE charger uses conductive rail to reduce conductivity loss, heat and frictional resistance, while the other purchase uses conductive spring.

*NITECORE奈特科爾的充電器使用智能控制芯片,保證快速充電及減少能量流失,而對比充電器沒有智能控制芯片。
*The NITECORE charger with DC-DC charging mode ensures quick charge and minimizes energy loss, while the other purchase doesn’t have intelligent control chip.

圖片附件: Catch47BC(06-05-16-09-51).jpg (2018-6-8 20:22, 40.54 KB) / 下載次數 294
https://wii.tw/~fogerdis/attachment.php?aid=105301&k=2b17a7db2a8b1c1461f43494f63970c0&t=1734544818&sid=y8FfYL



圖片附件: Catch(06-05-16-09-51).jpg (2018-6-8 20:22, 23.18 KB) / 下載次數 325
https://wii.tw/~fogerdis/attachment.php?aid=105302&k=da5f80d55f52cdf49e475526d9158939&t=1734544818&sid=y8FfYL


作者: foger    時間: 2018-6-15 18:05






歡迎光臨 電筒王論壇 (https://wii.tw/~fogerdis/) Powered by Discuz! 7.0.0